Free shipping on all orders over $50
7-15 days international
27 people viewing this product right now!
30-day free returns
Secure checkout
86117100
Features:* * Made of materials, * transceiver radio software defined specifically for Gigabit Ethernet SD cards* is a software-defined radio platform that supports 2TX and 2RX, supports Gigabit Ethernet and SD card. It refers to the design of the famous ADI ADALM-PLUTO and improves its shortcomings.Specification:ADC/DAC: AD9363 (can be cracked to AD9361 or AD9364)2 transmit channels, 2 receive channelsRadio frequency range: 70MHZ~6GHZReference clock: VCTCXO 40MHZ 0.5ppmSOC: For Zynq7010 FPGA: 28kMemory: 512MFlash memory: 32MUSB: 2.0, support OTGEthernet: 1000Mb SD can be used to bootDC input: 5V±0.5V-2A USBinterface:Note that all IO levels are 1.8V.3.1 When using ADI-Pluto official firmware, please connect URST-MI052.3.2 When using firmware, you need to support Ethernet, please connect URST-MIO463.3 When booting with SD card, please connect SD-H to 1V83.4 When using JTAG debugging, please connect JTAG# to ground3.5 When using external reference clock input, please connect EXCLK to GNDPTT key port:PTT drives the optocoupler through GPIO0 (MI00) and requires an external relay or control circuit.DFU key:At any time, you can press the DFU button and power up the again to enter DFU mode, but you will need to connect the URST jumper to MI052.Refer to CLK input IPEX:You can input an external high-precision reference clock to the AD9363 through the IPEX interface connection cable.The main level should not exceed 3.3V. You need to connect the EXCLK jumper to GND to turn off the built-in clock.Calibrate the frequency of the built-in VCTCXO:The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided you have a reference signal source. SD:To support SD card booting, you need to connect the SD-H jumper to 1V8.
【Wide Frequency Range】The + Transceiver Radio is designed to cover a wide frequency range from 70MHz to 6GHz, providing versatility for various applications.
【Software-Defined Radio Platform】This radio uses + software-defined technology, offering flexibility and adaptability to meet different requirements. It supports 2 transmit channels and 2 receive channels.
【Enhanced Design】Derived from the renowned ADI ADALM-, the + improves upon its predecessor's shortcomings. It features a construction and incorporates Ethernet and SD card support.
【 Components】Equipped with ADC/DAC AD9363 (crackable to AD9361 or AD, this transceiver ensures excellent performance and signal quality. It employs a VCTCXO 40MHz 5ppm reference clock for precise timing.
