5" Touch Screen Car Stereo with GPS Navigation, Bluetooth, FM Radio & 8-LED Night Vision Camera - Multimedia Receiver for Audio Systems, 2CH Video Input TFT LCD Monitor (Perfect for Road Trips & Daily Commutes)

Firstly, this product shipped quickly. Secondly, the video feed appears to be good quality. It comes with 2 stands, one is a suction cup that sticks to the windshield, and well, I might add. The other is a sticky pad to stick to the dash. It is easy to set up if you know how to set it up. My only complaint is that the directions on how to set it up are slightly unclear and appear badly translated, so I shall take the liberty of explaining it. Quite obviously the screen and the camera need power, I used a 12-volt battery. The red connectors connect to the black ones with one red and one black wire sticking out of it. The red goes to positive and the black to negative. Both the screen and the camera need one of these. The long black wire with yellow ends connects to the yellow connector on the camera on one end and the WHITE connector on the screen end. The white connector is AV1, and the yellow connector is AV2, make sure to plug it into the white connector. The red wires hanging off of the long black one don't do anything that I could figure, I simply taped them up to the black wire. If you want it to switch on when you go into reverse, wire the positive camera wire to the positive on the reverse lights. The screen turns black when the camera is off.Basically: Short black and red go to negative and positive, respectively. The long black cable with yellow ends goes to the camera and the white plugin on the screen. The very short red wires on the long black one don't need to be connected for the system to work.