Automatic Morse Code Keyer - Memory Keyer Transmitter for Ham Radio Amplifier - Perfect for CW Operation & Morse Code Practice

Message : Every message can not only be stored by a long memory, it also can be separate into several parts by inputting EOM (End of Message)at the end of every segmentation. Play the Segmentation: If you want play the second segmentation, just press the memory key 2 times; if you want the third one, then press the key 3times, etc . Command Mode: Press F1 AND F2 at the same time, you will hear "C", now it is under the mode of command. End Command Mode: Press F1 and F2 at same time again, or you can input "D" by pressing the auto key. When you use the auto key, PIC will make a judgement: you will hear "R" for the right command, and "?" for invalid command. "A": Turn off the memory of long-short voice. "B": Turn on the memory of long-short voice. This is the most common command. "C" and "E": Repeat play. it will stop automatically after playing 255 times under the 'E' command mode. You just press the short voice auto key if you want to turn it off. Press it again, after keyer making the judgement of "R", it will be over. "C" can't stop automatically, but it can be used as a sign. You just press the short voice auto key if you want to turn it off. Press it again, after keyer making the judgement of "R", it will be over. "D" ends the command mode, and goes back to common mode. "T" transfer command, it lasts for 30 seconds,then goes back to command mode.