Free shipping on all orders over $50
7-15 days international
28 people viewing this product right now!
30-day free returns
Secure checkout
19571862
Cross band repeater function plus The GD-88 works as a basic radio and helps you increase your range. It can send a signal on a frequency band (UHF/VHF) that is received on another frequency band (VHF/UHF). In addition, unlike conventional cross-band repeaters, the GD-88 can also perform a cross-band repeat from an analogue to a digital band (or from digital to analogue). Same frequency repeater (SFR) function Especially in emergency situations where conventional communication systems are often not available, the GD-88 becomes an indispensable radio. By using only one frequency to send and receive, it makes full use of DMR TDMA technology by using a time slot for receiving and transmitting the received signal at the same frequency, but using the second time slot and acting as a Same-Frequency Repeater (SFR). Several GD-88 in a particular area can form a mesh network, so even single VFO radios can communicate with other radios bridged by multiple GD-88 working in SFR mode. GPS for use with APRS The GD-88 features a powerful built-in GPS receiver for use with APRS. This allows real-time push messages from position beacons to the APRS network and makes it the ideal companion for all outdoor activities where you need to be located by others. In addition to SFR, APRS functionality is another advantage of the GD-88 in any type of emergency situation. Dual band, dual mode and even dual standby The GD-88 features two independent VFOs that allow dual-band operation on both VHF and UHF. With its dual mode, the GD-88 allows a smooth transition from communication with conventional analogue radios to digital DMR operations (DMR Tier I and Tier II). It also has dual standby. 2-in-1 table charger The GD-88 comes with a unique desktop charger that allows you to charge your radio and an additional battery (not included) at the same time. 7W + 300K DMR contacts The Radioddity GD-88 is a powerful handheld radio with compact design, selectable output of 7W/2.5W and storage space for up to 300,000 DMR contacts, which can be imported in bulk via software. 3000 mAh battery and energy saving With its powerful 3000 mAh battery and built-in energy-saving function, the Radioddity GD-88 offers up to 24 hours standby time, 15 hours continuous operation in analogue mode and 23 hours in digital mode. What is included? 1 x Radioddity GD-88 radio & 3000 mAh battery 1 x antenna 1 x belt clip & wrist strap 1 x Desktop Charger (2-in-1) & AC Adaptor 1 x programming cable Specifications Frequency range: VHF 136-174MHz RX/TX | UHF 400-480MHz RX/TX LOW PERFORMANCE: 2.5W High Performance: 7W Zones: 16 Channel capacity: Up to 4000 (250 per zone) Digital contacts: 300,000 Waterproof: IP54 Display: 2 inch TFT colour screen Battery: 3000 mAh lithium-ion battery with energy-saving function Band width: VHF ≤±5 kHz @ 12.5 kHz | UHF ≤± 7 kHz @ 25 kHz Import/Export: Supports direct bulk input and export DMR: Tier I + II Programmable: Comes with a programming cable Speaker jack: Kenwood/Wouxun 2 Pin Earphone/Speaker Microphone K1 Connector Size/Weight: 12.5x5.5x3.5cm/330g
Dual Band, Dual Mode, and Dual Standby | It contains two independent VFOs that allow dual-band operation on VHF and UHF channels. With dual mode, the GD-88 allows a smooth transition from communication with conventional analog radios to digital DMR (DMR Tier II) at any time. It also comes with dual-standby to monitor two channels at the same time.
Cross-band Repeater Function | Working as a base radio to extend your talking range, it is capable of transmitting on one frequency band (UHF/VHF) a receive a signal on the other frequency band (VHF/UHF). Compared to traditional cross-band repeaters, can cross-band repeat from an analog band to a digital one (or from digital to analog.)
Same Frequency Repeater (SFR) Function | Using just one frequency for transmitting and receiving gives it full use of the DMR TDMA-technique by using one timeslot for receiving and transmitting the received signal on the same frequency, but using the second timeslot, acting as a Same-Frequency-Repeater (SFR). Multiple GD-88’s within a certain area can create a mesh-network, allowing single-VFO radios to communicate with other radios bridged by several GD-88’s that are operating in SFR-mode. The GD-88 is must-have radio for emergency situations where conventional communication systems are limited or unavailable.
Real-time push messages of position | It allows real-time push messages of position beacons to the APRS-network. This makes it ideal for outdoor activities where you need to be tracked by others, especially emergency situations.
Long-Lasting Power | With a powerful 3000mAh battery and built-in power saving feature, the Radioddity GD-88 supports up to 48 hours of standby time, 15 hours of use under analog mode, and 23 hours of use under digital mode.
